Deck Roll Forming Machine

Deck Roll Forming Machine This type of machine is specially designed for deck, the closed joint-point can supply better loading capacity, in the same condition, and the closed deck sheet is better effective width than other deck sheets and supplies stronger resistance. Because the musle of sheet is covered by concret, so it has fireproof and insulating function. Install the sheet quickly, the service life is long. Machine Features: 1:Consist of un coiler and its base → coil sheet guiding equipment → Roll Forming system → Post-cutting equipment → Hydraulic station → Controlling System → Supporter Table 2: The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. 3: It’s best to be used as the floor of high buildings, and the cost of such floor is low. 4: Material Spec.: Galvanized steel sheet 5: Thickness of coil sheet: 0.8-1.2mm 6: Main motor power: 11.5 kw 7: Forming Speed: 10-12m/min 8: Hydraulic Station Power: 3kw 9: Quantity of stands about: 24 groups 10: Hydraulic Pressure: PLC 11: Controlling System: PLC 12:Index error of length:10m±2mm 13: Total weight: about 1800kg 14: Voltage: 380 V/3 phase/ 60 Hz or under buyer’s requirement 15: Standard Equipment of Machine a) Passive Un coiler ----------------------- 1 set b) Guiding Equipment ------------------------- 1 set c) Rolling Forming Machine ------------------- 1 set d) Main Body --------------------------------- 1 set e) Post-cut Equipment ------------------------ 1 set f) Hydraulic Station ------------------------- 1 set g) PLC Controlling desk ---------------------- 1 set